performance from today’s 10GbE solutions.
The MCH also provides PCIe Gen 3, SRIO
Gen 2, and a crossbar switch option. The CBS
allows any fabric to be utilized including
custom solutions.
NAT: power supply for MicroTCA
achieved class A and class B certification
N.A.T. announces that the NAT-PM AC600,
a 600WAC power supply for MicroTCA sys-
tems in single-width full-size form factor has
successfully passed EMC tests for Class B ac-
cording to EN55022 and safety tests according
to EN68950. The NAT-PM- AC600 is the
only AC power supply for MicroTCA in this
form factor and being class A and class B cer-
tified makes the NAT-PM-AC600 a unique
solution for any MTCA.0 and MTCA.4 based
applications.
Advantech: fanless out-of-the-box
solution for Internet of Things
Advantech and Intel are launching UTX-3115
coupled with the Intel gateway solutions for
internet of things. The solution features a pre-
integrated software and hardware platform
containing a Linux operating system, security
and management features. This out-of-the-
box solution simplifies customer deployment
of IoT products; and it allows secure data ag-
gregation, filtering, and analysis from edge
devices to the cloud throughWiFi and/or even
4G technologies.
IBASE: network appliance based on Atom
C2000 family with Intel QuickAssist
IBASE launches the FWA6404 network appli-
ance featuring four high-speed Gigabit LANs
and support for the new Intel Atom processor
C2000 family and Intel QuickAssist technology.
Built in a 1U rackmount chassis, the FWA6404
is designed for various networking applications
requiring high computing performance and
big bandwidth applications.
Advantech: 3.5” MI/O Extension fanless
SBC based on Intel 4th generation Core
i5/Celeron
Advantech announced its MIO-5271 SBC in a
3.5” MI/O Extension(146 x 102 mm) form
factor, based on Intel 4th generation Core
i5/Celeron
processors.
It
supports
1600/1333MHz DDR3L, USB 3.0, SATA up to
6Gb/s (600 MB/s), Intel AMT 9.5 Release, and
has triple independent display capability. Ad-
vantech has developed an optimized thermal
solution for MIO-5271, making fanless design
possible on this kind of compact, high per-
formance platform.
Langer: system for comparative
EMC measurements
Langer EMV-Technik introduced ESA1, a meas-
urement system for comparative EMC meas-
urements, which will help you make targeted
and efficient progress in the development of
modules or devices. The ESA1 allows you to
perform measurements directly at your work-
place in the course of developments, you will
save time and costs over the entire development
process. EMC measurements carried out with
the ESA1 are similar to far-field measurements
so that improvements to the device under test
that have been identified with the ESA1 and
then implemented have a proportional effect
on the result of the far-field measurement.
Kontron: multiscreen live transcoder
and VoD transcoder
Kontron and Vantrix announced two new high
performance transcoding products: a multi-
screen live transcoder and VoD transcoder.
Both companies redefine multiscreen video
transcoding performance. Vantrix’s software
is installed as a virtual appliance and operates
on Openstack, enabling flexibility and scala-
bility. A single appliance can run concurrent ap-
plications, such as Live and VoD transcoding,
DRM encryption, and streaming with selectable
resource assignments for different uses.
EKF: peripheral slot board for
CompactPCI serial systems
The SK1-CHORD is a peripheral slot board
for CompactPCI Serial systems and acts as
carrier card for a PMC-style mezzanine mod-
ule. PMC modules are provided with a legacy
PCI interface and are widely in use for indus-
trial and scientific applications. The SK1-
CHORD supports the most common 32-bit
33/66MHz PMC modules. The SK1-CHORD
is equipped with a PCI Express to PCI bridge
for conversion of data from the CompactPCI
Serial backplane, to the on-board PCI parallel
bus. The PMC module fits on the PMC con-
nectors J11/J12 at 10mm height. The SK1-
CHORD can be installed into any peripheral
slot of a CompactPCI Serial backplane.
VadaTech: MicroTCA.4 chassis solves
power redundancy problem
VadaTech offers an 8U high chassis compliant
with the MicroTCA.4 specification that offers
N+1 redundant power to 4400W. MicroTCA.4
systems utilize double modules with an RTM
connector for rear I/O. By adding RTM and
higher power large modules, the overall power
requirement in chassis are higher. Many High-
Energy Physics and other applications require
full power redundancy in the system.
41
June 2014
P
RODUCT
N
EWS
