The new TFI line is
a set of surge filters which come in compact DIP-24 (TFI 20) or 1.6” x
1” (TFI 150 and TFI
300) packages. Placed in front of any DC/DC converter the TFI clamps
momentary over-voltage transients to a safe value in order to protect
converter from being...
Current sensors are frequently used to measure and
control the load current in power supplies, safety circuits and a
variety of control circuits. In applications where controlling the
current is r...
developers in many ways during the entire development process of a new
power electronics application. The development process typically
comprises the functional concept, the component selection, the
mechanical design, the controller implementation and finally the...
Wolfspeed / Cree GTVA High-Power RF
GaN on SiC HEMT are 50V High Electron Mobility Transistors (HEMT) based
on Gallium-Nitride on Silicon Carbide technology that offer high power
density coupled with a high breakdown voltage, enabling highly
efficient power amplifiers.
Technologies introduces the new OptiMOS IR3826(A)M integrated
point-of-load DC-DC voltage regulator. It is a fully integrated and
highly efficient device in two versions (IR3826AM for 16 A and IR3826M
for 23 A) for applications such as netcom router and switches,
An isolation device
is an integrated circuit that allows the transfer of data and energy
between high- and low-voltage units, preventing the presence of
dangerous or uncontrolled transient current coming from the network.
The goal is to increase power density and provide insulation...
Rail voltages are getting smaller, and tolerances
are decreasing. As a result, making accurate power rail measurements
has become much more difficult. In the past, any scope was able to
When it comes to effective filtering and
protection of USB 3.1 devices, Würth Elektronik is the one-stop-shop
and competent partner for questions on EMC: TypeC™ connectors, EMC
filters, TVS diodes for ESD protection, AC/DC to DC/DC power
TDK announces the introduction of the
TDK-Lambda FQA series of EMC filters, with a rating of +/-40Vdc at 20A.
The FQA has a rugged encapsulated quarter-brick package with a choice
of flanged or non-flanged baseplates. These modules are suitable for use
in a wide variety of harsh and...
Current measurement is an integral part of power
electronics. Power supply designers, battery management systems, and
motorized drives often need to measure current accurately. Current transducers (not to be confused with current transformers) can measure both DC and AC.
Bel Power Solutions announced the ABE1000
Series features a wide universal AC input range of 85-264 VAC, offering
up to 1000 W of output power with an integrated fan, in a compact
footprint 127.0 x 241.5 x 41 mm and with a variety of single output
voltages. The high
A Hall-effect sensor
varies its output voltage in response to a magnetic field. Hall-effect
devices are used as proximity sensors and for positioning, speed, and
current detection. They are widely used in motor control systems. A
Hall-effect sensor is a long-lasting solution because...
Diodes announced the AL3644, a high-speed,
dual-channel flash LED driver designed to support advanced camera flash
and torch functionality, as offered by the latest smartphones and other
portable consumer devices. Key features include independently
As automotive designs move to electrification,
high-wattage power electronics become critical components in the new
electronic drivetrain and battery systems. In these devices, galvanic
a new series of higher surge TVS Diode products in a DO-214AB package.
The 8.0SMDJ series is optimized to protect sensitive electronic
equipment from transient voltage induced by lightning and other voltage
events. Because it combines up to 8000W of peak pulse...
Aspencore Media GmbH
Rauwagnerstr. 5, D-85560 Ebersberg