September 26, 2012 - presented by
 |
Sponsor Message |
| ONYX, SWaP-C Rugged Embedded Computer Assembled, tested and qualified, ONYX provides a SWaP-C platform ready to application, requiring no NRE. Based on COMe module Core i7 2nd and 3rd Gen to meet a wide variety of mission requirements (MIL-STD-810, DO-160). The AMD Radeon E6760 GP-GPU option with its 480 Stream Processors matrix provides up to 576 GFLOPs at 25W. |
- Freescale Kinetis L series microcontrollers now broadly available
- Microchip: 8-bit PIC MCUs combine high integration, low power and automated touch sensing
- Maxim: energy measurement and diagnostic solution for mission-critical motors
- demmel: intelligent 10.2-inch display on show at electronica 2012
- Toshiba: low ON-resistance MOSFETs in high-performance UDFN6 package
- Peregrine Semiconductor expands European operations
- Atlantik: enhanced Cortex-M0 microcontroller series by Holtek
- Mouser debuts power supply technology site to charge design development
- ON Semi: wideband advanced noise reduction SoC for smarter voice capture devices
- Densitron: new bonding facility and TFT & E-paper design solutions at electronica
- XMOS demos multicore microcontroller technology at electronica 2012
- TI: Sitara AM335x ARM Cortex-A8 starter kit with LCD touch screen
- ADI: Eclipse-based IDE for SHARC and Blackfin processors
- Symtavision: system-level tool suite for embedded real-time systems
 |
Sponsor Message |
| New Application Card on Scope of the Art: Measuring Small Signals accurately For measurement settings below 10 mV/div, oscilloscopes typically reduce the measurement bandwidth in order to keep the trace noise as low as possible. The R&S RTO is different: It provides the full bandwidth even for the most sensitive settings; an A/D converter with more than 7 effective bits (ENOB) offers high measurement dynamic. |
- Vector: AUTOSAR 4.0.3 basic software available
- Agilent: 60-GHz remote sampling head oscilloscope module
- Green Hills announced new release of its compiler toolchain
- IAR: tool suite for Renesas’ new RH850 core for automotive applications
- Attolic: dual-core development and debug support for Freescale’s Vybrid
- Rohde & Schwarz: triggering and decoding audio signals
- COMMELL: 3rd and 2nd generation Intel Core i7 / i5 / i3 Mini-ITX motherboard
- Artila: ARM SOM enables device control with remote desktop
- Fujitsu: Mini-ITX board D3003-S2 with Embedded Linux platform
 |
Sponsor Message |
| DHCOM Standard - form, fit and function compatible Computer On Module DHCOM standard is a novel, scalar concept for modules from DH electronics. This standard enables the use of only one and the same carrier board to accommodate the complete product range, from ARM9 up to Cortex-A8, of the form, fit and function compatible COMs. DH electronics provides a Linux or Windows CE board support package with U-Boot as well as one-stop support. |
- Axiomtek: 3rd gen Intel Core processor Mini ITX motherboard
- NI: single-board RIO GPIC enables new embedded system design approach
- Curtiss-Wright: rugged COTS system supplies combat vehicles with networking backbone
- VIA: Mini-ITX embedded board features latest VIA VX11H MSP
- AAEON: 21.5-inch full HD infotainment multi-touch display
- Telit: cellular modules connect cashless vending machines
- Interface Masters: VM-aware dual port 1G Bypass NIC
- Atlantik: Bluetooth modules support dual-mode
- DFI: Mini-ITX motherboard supports rich graphics and power-saving features
- Microsemi: SOM features SmartFusion with ARM Cortex-M3 and uClinux
- Kontron: highly customizable vehicle computer